Lab Specialists



Other Products

Custom Fume Hoods

Go Back
Custom Fume Hoods
Custom Fume Hoods With Horizontally Sliding Sashes/Doors
  • Custom Fume Hoods with Horizontally Sliding Sashes/Doors are designed with door panels that slide from left to right across the opening. This door configuration is designed to minimize the amount of opening and allow the users to work around the door and place it in front of them as a shield.
  • All New-Tech™ Custom Fume Hoods with Horizontally Sliding Sashes/Doors that have been requested to have an ASHRAE 110 "As Manufactured" test have passed.
  • Available in sizes ranging from 4' wide to 20' wide (left to right), from 2' to 12' deep (front to back) and from 4' to 16' tall.
Custom Fume Hoods with Vertically Rising Sashes
  • Custom Fume Hoods with Vertically Rising Sashes are designed with sashes that are raised and lowered vertically. This sash configuration is designed to maximize the amount of clear opening, both vertically and horizontally, allowing the least amount of obstruction when setting up or modifying the equipment or processes being done inside the hood.
  • All New-Tech™ Custom Fume Hoods with Vertically Rising Sashes that have been requested to have an ASHRAE 110 "As Manufactured" test have passed.
  • Available in sizes ranging from 4' wide to 10' wide (left to right), from 2' to 12' deep (front to back) and from 4' to 16' tall.
Custom Ventilated Enclosures Or Fume Hoods With Multiple Door/Sash Openings
  • When conventional Bench Top Fume Hoods, Horizontally Sliding Sashes/Doors, orVertically Rising Sashes do not provide enough safe access to your equipment or processes, a New-Tech™ Custom Ventilated Enclosure may suit your needs.
  • When placing tall equipment or processes in a Custom Ventilated Enclosure, consider having Upper and Lower Horizontally Sliding Sashes/Doors. This will safely allow the users a separate access to the upper section of the hood without entering the inside of the enclosure while minimizing the exhaust airflow needs.
  • When the openings for either Horizontally Sliding Sashes/Doors or Vertically Rising Sashes become wider than 8', consider using multiple openings. This will make the doors/sashes lighter and easier to use.
  • The Ventilated Enclosures can be designed with access from both sides of the enclosure while still having balanced exhaust airflow from left to right and from top to bottom.
  • Available in sizes ranging from 4' wide to 30' wide (left to right), from 2' to 12' deep (front to back) and from 4' to 20' tall.

© Copyright Laboratory Specialists 2015. All rights reserved